Transfer Printing Process of Bio-Based Nylon 56 and Cotton Interwoven Fabrics

Authors

  • Runshan Chu National Engineering Laboratory for Modern Silk, College of Textile and Clothing Engineering, Soochow University, 199 Renai Road, Suzhou 215123, Jiangsu, China
  • Yanbo Zhang National Engineering Laboratory for Modern Silk, College of Textile and Clothing Engineering, Soochow University, 199 Renai Road, Suzhou 215123, Jiangsu, China
  • Ling Li National Engineering Laboratory for Modern Silk, College of Textile and Clothing Engineering, Soochow University, 199 Renai Road, Suzhou 215123, Jiangsu, China
  • Tieling Xing "National Engineering Laboratory for Modern Silk, College of Textile and Clothing Engineering, Soochow University, 199 Renai Road, Suzhou 215123, Jiangsu, China" & "National Innovation Center of Advanced Dyeing and Finishing Technology, Tai’an 271000, China"
  • Guoqing Chen National Engineering Laboratory for Modern Silk, College of Textile and Clothing Engineering, Soochow University, 199 Renai Road, Suzhou 215123, Jiangsu, China

DOI:

https://doi.org/10.12974/2311-8717.2023.11.01

Keywords:

Dry heat transfer printing, Reactive dye, Bio-based nylon 56, Cotton

Abstract

Using Annosol Reactive Blue DS dye as the colorant, an inkjet printing ink was developed, and its rheological properties and dynamic surface tension were evaluated for its use in dry heat transfer printing of patterns on bio-based nylon 56 and cotton interwoven fabrics. In particular, the effects of the dry heat transfer printing parameters on the printing properties of the ink on bio-based nylon 56 and cotton interwoven fabrics were investigated. The results revealed that the optimal parameters of the dry heat transfer printing of the custom-produced ink on bio-based nylon 56 and cotton interwoven fabrics are as follows: hot pressing at 130 °C under 3MPa pressure, steamer at 102 °C, and saturated steaming for 15min. The color fastness to both soap wash and rubbing of the bio-based nylon 56 and cotton interwoven fabrics dyed with Annosol Reactive Blue DS through dry heat transfer printing were determined to be of grades 3–4 and above, meeting the color fastness requirements of printed fabrics.

References

Draths K M, Frost J W. Environmentally compatible synthesis of catechol from D-glucose. Journal of the American Chemical Society, 2002, 117(9): 2395-2400. https://doi.org/10.1021/ja00114a003

Zhang Longgui, Ji Wenxi, Li Juan. Preparation and application of bio-based PA. China Synthetic Resin and Plastics, 2017, 34(2): 86-91.

Wu Quande, Hao Yuanzeng. Property and application of new engineering plastics nylon 46. Engineering Plastics Application, 2000(11): 31-33.

Wang Wanjie, Wang Yudong, Liu Minying, Zhao Qinxiang, Ren Yanrong, Guo Ke, Li Xiangkui. Study on the crystallization kinetics of flexible and toughness PEFA 1212 under the constant cooling rate conditions. Polymer Materials Science & Engineering, 2002, 18(4): 158-161.

Lu Chengde. Structure and performance testing analysis of nylon 56 fiber. Chemical Fiber & Textile Technology, 2017, 46(3): 42-46.

Qi Yanbin, Ma Weichao, Chen Kequan. Production of 1,5-pentanediamine from lysine fermentation broth catalyzed by Escherichia coli whole cell. Chemical Industry and Engineering Progress, 2017, 36(5): 1843-1847.

Pardal F, Salhi S, Rousseau B, Tessier M, Claude S, Fradet A. Unsaturated polyamides from bio-based Z-octadec-9-enedioic acid[J]. Macromolecular Chemistry and Physics, 2008, 209(1): 64-74. https://doi.org/10.1002/macp.200700319

Li Mengmeng, Hu Liu, Hou Aiqin, Xie Kongliang. Development of dyeing property of Bio-based Nylon 56. Dyestuffs and Coloration, 2016, 53(05): 25-30.

Wu Tiantian, Wang Xueli, Yu Jianyong, Gao Yu, Liu Xiucai, Li Naiqiang.Study on Isothermal Crystallization Kinetics Bio-based Nylon 56. Synthetic Fiber in China, 2017, 46(2): 1-5-26.

Li Qing, Miao Sainan, Xing Tieling, Chen Guoqiang.Rheology and morphology of thickeners in textile transfer printing. Journal of Textile Research, 2015, 36(9): 75-81.

Li Qing, Xing Wang Yong, Xing Tieling, Chen Guoqiang.Properties of novel reactive transfer printing of silk. Journal of Donghua University(English Edition), 2013, 30(6): 514-520.

Li Qing, Xing Tieling, Chen Guoqiang. Novel transfer printing paper for silk printing with reactive dye. Materials Research Innovations, 2014, 18: 879-885. https://doi.org/10.1179/1432891714Z.000000000506

Miao Sainan, Li Qing, Xing Tieling, Chen Guoqiang. Outline sharpness of cotton reactive prints with dye dry-heat transfer printing. Dyeing & Finishing, 2014, 40(21): 5-8+14.

Zhang Yu, Gan Chengyong, Chu Runshan, Xing Tieling, Chen Guoqiang. Dry-transfer printing of polyester/cotton fabric with disperse and reactive dye. Dyeing & Finishing, 2020, 46(5): 13-18.

Ma Xuesong, Gao Yi, Chen Ying, Jiang Yu, Zhu Feishi, Mei Tingjie. Dyeing performance of bio-based nylon PA56 with reactive dyes. Dyeing & Finishing, 2019, 45(18): 9-13-29.

Liu Li, Wang Liang, Wang Yifei, Chen Haisheng, Chai Lei, Yang Zheng, Tan Chuqing. Test and analysis on the thermal properties of microencapsulated phase change material suspension using propanol/water solution as base fluid. Journal of Functional Materials, 2014, 45(1): 1109-1113.

Jia Chunjiang, Chen Guangxue, Li Xiaozhou, Zhao Lei. Research on the application of water based ink in rotogravure printing. Packaging Journal, 2011, 3(1): 32-35-5.

Wang Zhenning, Tang Zhenyu. Numerical simulation of the effect of liquid surface tension and viscosity on the droplet formation of piezoelectric ejection. Packaging Engineering, 2010, 31(13): 24-27.

Downloads

Published

2023-06-21

How to Cite

Chu, R. ., Zhang, Y. ., Li, L. ., Xing, T. ., & Chen, G. . (2023). Transfer Printing Process of Bio-Based Nylon 56 and Cotton Interwoven Fabrics. Journal of Composites and Biodegradable Polymers, 11, 1–8. https://doi.org/10.12974/2311-8717.2023.11.01

Issue

Section

Articles