Theory and Practical Procedure for Predicting S-N Curves at Various Stress Ratios
DOI:
https://doi.org/10.12974/2311-8717.2019.07.8Keywords:
S-N fatigue, Constant fatigue life, Stress ratio, Fatigue damage.Abstract
Predictive models in the past for stress ratio effect on S-N fatigue life have been subject to modifications since the 19th century. Many of them have been developed with limited experimental verifications or beyond the theoretical limit. Also, they have employed weak S-N curve models for the development, resulting in inefficiency in applications. There has been, also, a missing link in the development of predictive models between S-N curve behaviour and stress ratio effect. In this paper, theoretical analysis is presented and subsequently a practical procedure for predicting S-N curves at various stress ratio is proposed. The theoretical and experimental characteristics of the constant fatigue life (CFL) diagram were clarified for capability and limitations, and dependence of experimental fatigue behaviour. Mathematical relationships between linear CFL lines and fatigue damage parameters were successfully derived. As a result, the Kim and Zhang S-N curve model was successfully dovetailed with the linear CFL lines to predict S-N curves for the whole range of stress ratios. Theoretical predictions of fatigue life based on the mathematical relationships were verified with experimental data.
References
Kim HS. Mechanics of Solids and Fracture, 3rd ed. Bookboon, London 2018. ISBN 978-87-403-2393-1.
Kitagawa H, Takashima S. Application of fracture mechanics to very small fatigue cracks or the cracks in the early stage. Proceedings of the Second International Conference on Mechanical Behavior of Materials, American Society for Metals, Materials Park, Boston, MA, USA, 16-20 August 1976; pp. 627-631.
Eskandari H, Kim, HS. A Theory for mathematical framework and fatigue damage function for the S-N plane. In Fatigue and Fracture Test Planning, Test Data Acquisitions, and Analysis; ASTM STP1598; Wei, Z., Nikbin, K., McKeighan PC, Harlow DG. Eds.; ASTM International: West Conshohocken, PA, USA, 2017; pp. 299-336. https://doi.org/10.1520/STP159820150099
Burhan I, Kim HS. S-N curve models for composite materials characterisation: an evaluative review, Journal of Composites Science 2018; 2: 1-29. https://doi.org/10.3390/jcs2030038
Gerber WZ. Bestimmung der zulassigen Spannungen in Eisen-Constructionen.
[Calculation of the allowable stresses in iron structures]. Z Bayer Arch. Ing. Ver. 1874; 6: 101-110.
Weyrauch PJJ. Strength and Determination of the Dimensions of Structures of Iron and Steel with Reference to the Latest Investigations, 3rd ed.; Du Bois, A.J., Translator; John Wiley and Sons: New York, NY, USA 1877.
Goodman J. Mechanics Applied to Engineering, 1st ed.; Longmans, Green and Co.: London, UK 1899.
Soderberg CR. Factor of safety and working stress. Trans. Am. Soc. Test Matls. 1930; 52: 13-28.
Basquin OH. The exponential law of endurance test. ASTM STP 1910, 10, 625-630.
WeibullW. The statistical aspect of fatigue failures and its consequences. In Fatigue and Fracture of Metals; Massachusetts Institute of Technology; John Wiley & Sons: New York, NY, USA, 1952; pp. 182-196.
Sendeckyj GP. Fitting models to composite materials fatigue data. In Test Methods and Design Allowables for Fibrous Composites; ASTM STP 734; Chamis, C.C., Ed.; ASTM International: West Conshohocken, PA, USA, 1981; pp. 245- 260. https://doi.org/10.1520/STP29314S
Bond IP. Fatigue life prediction for GRP subjected to variable amplitude loading, Composites: Part A 1999; 30: 961-970. https://doi.org/10.1016/S1359-835X(99)00011-1
Passipoularidis VA, Philippidis TP, A study of factors affecting life prediction of composites under spectrum loading, International Journal of Fatigue 2009; 31: 408-417. https://doi.org/10.1016/j.ijfatigue.2008.07.010
Adam T, Fernando G, Dickson RF, Reiter H, Harris B. Fatigue life prediction for hybrid composites. Int J Fatigue 1989; 11(4): 233-7. https://doi.org/10.1016/0142-1123(89)90306-X
Kawai M, Koizumi M. Nonlinear constant fatigue life diagrams for carbon/ epoxy laminates at room temperature, Composites: Part A 2007; 38: 2342-2353. https://doi.org/10.1016/j.compositesa.2007.01.016
Sendeckyj G P. Constant life diagram - a historical review, International Journal of Fatigue 2001; 23: 347-353. https://doi.org/10.1016/S0142-1123(00)00077-3
Kawai M. Fatigue life prediction of composite materials under constant amplitude loading, Chapter 6, in Fatigue life prediction of composites and composite structures edited by A. P. Vassilopoulos, Woodhead Publishing Limited, Oxford, Cambridge, New Delhi, 2010, p182. https://doi.org/10.1533/9781845699796.2.177
Haigh BP. Experiments on the fatigue of brasses. J Inst Metals 1917; 18: 55-86. https://doi.org/10.1177/002205741708600114
D'Amore A, Caprino G, Stupak P, Zhou J, Nicolais L. Effect of stress ratio on the flexural fatigue behaviour of continuous strand mat reinforced plastics, Science and Engineering of Composite Materials 1996; 5(1): 1-8. https://doi.org/10.1515/SECM.1996.5.1.1
Vassilopoulos AP, Manshadi BD, Keller T. Piecewise nonlinear constant life diagram formulation for FRP composite materials, International Journal of Fatigue 2010; 32: 1731- 1738. https://doi.org/10.1016/j.ijfatigue.2010.03.013
Poursartip A, Beaumont PWR. The fatigue damage mechanics of carbon fibre composite laminate: II-Life prediction. Compos Sci Techno 1986; 25: 283-299. https://doi.org/10.1016/0266-3538(86)90045-X
Epaarachchi JA, Clausen PD. An empirical model for fatigue behavior prediction of glass fibre-reinforced plastic composites for various stress ratios and test frequencies. Compos. Part A Appl. Sci. Manuf. 2003; 34: 313-326. https://doi.org/10.1016/S1359-835X(03)00052-6
Weibull W. Chapter VIII, Presentation of Results. In Fatigue Testing and Analysis of Results; Pergaman Press: Oxford, UK; London, UK; New York, NY, USA; Paris, France 1961. https://doi.org/10.1016/B978-0-08-009397-0.50012-6
Kim HS, Zhang J. Fatigue damage and life prediction of glass/vinyl ester composites, Journal of Reinforced Plastics and Composites 2001; 20: 834-848. https://doi.org/10.1177/073168401772678959
Harris B, Gathercole N, Lee JA, Reiter H, Adam T. Philosophical Transactions: Mathematical, Physical and Engineering Sciences Jun. 15, 1997; 355(1727): 1259-1294. https://doi.org/10.1098/rsta.1997.0055
Kawai M, Itoh N. A failure-mode based anisomorphic constant life diagram for a unidirectional under off-axis fatigue loading at room temperature. Journal of Composite Materials 2014; 48(5): 571-592. https://doi.org/10.1177/0021998313476324
Ibrahim B, Kim HS, Thomas S. A refined S-N curve model, In: International Conference on Sustainable Energy, Environment and Information (SEEIE 2016), Bangkok, Thailand, 2016, pp.412-416, doi:10.1017/CBO9781107415324.004; AMSME-E107, 23/34- 35 Traimit Road, Taladnoy, Bangkok 10100, Thailand.
Eskandari H, Kim HS. A theory for mathematical framework of fatigue damage on S-N plane, Key Engineering Materials 2015: 627:117-120. https://doi.org/10.4028/www.scientific.net/KEM.627.117
Vassilopoulos AP, Manshadi BD, Keller T. Influence of the constant life diagram formulation on the fatigue life prediction of composite materials, International Journal of Fatigue 2010; 32: 659-669. https://doi.org/10.1016/j.ijfatigue.2009.09.008
Gamstedt EK, Sjogren BA. Micromechanisms in tensioncompression fatigue of composite laminates containing transverse plies. Compos Sci Technol 1999; 59: 167-178. https://doi.org/10.1016/S0266-3538(98)00061-X
Miyano Y, Nakada M. Influence of stress ratio on fatigue behaviour in the transverse direction of unidirectional CFRPS, Journal of Composite Materials 1995; 29:1808- 1822. https://doi.org/10.1177/002199839502901401
Veazie DR, Gates TS. Compressive Creep of IM7/K3B Composite and the Effects of Physical Aging on Viscoelastic Behavior, Experimental Mechanics 1997; 37(1): 62-68. https://doi.org/10.1007/BF02328751