Piezoelectric Energy Harvesting Characteristics of Barium Titanate Based Composite Laminates under Cyclic Concentrated Loads
DOI:
https://doi.org/10.12974/2311-8717.2017.05.02.2Keywords:
Piezomechanics, testing and simulation, barium titanate/copper laminate, bending, energy harvesting.Abstract
We investigate the dynamic electromechanical behavior in barium titanate (BT) based composite cantilevers under cyclic concentrated loads in a combined numerical and experimental approach. The laminated composite cantilever consists of the BT and copper (Cu) layers, and the BT layer has sensing and driving electrodes. The output voltage of the cantilevers due to cyclic bending were calculated by three dimensional finite element method. The output voltage was then measured, and numerical simulations were compared with test results to verify the finite element model. The influences of sensing electrode geometry and load resistance on the dynamic electromechanical fields were examined in detail.
References
Shindo Y and Narita F. Dynamic bending/torsion and output power of S-shaped piezoelectric energy harvesters. International Journal of Mechanics and Materials in Design 2014; 10: 305-311. https://doi.org/10.1007/s10999-014-9247-0
Mori K, Shindo Y, Narita F and Okura S. Detection and response characteristics of giant magnetostrictive / piezoelectric laminated cantilevers under cyclic bending. Mechanics of Advanced Materials and Structures, in press. https://doi.org/10.1080/15376494.2014.949924
Vatansever D, Hadimani RL, Shah T and Siores E. An investigation of energy harvesting from renewable sources with PVDF and PZT, Smart Materials and Structures 2011; 20: 055019. https://doi.org/10.1088/0964-1726/20/5/055019
Wong VK, Ho JH and Yap EH. Dynamics of a piezoelectric beam subjected to water droplet impact with water layer formed on the surface, Journal of Intelligent Material Systems and Structures, in press. https://doi.org/10.1177/1045389X14549871
Okayasu M and Watanabe K. The electric power generation characteristics of a lead zirconate titanate piezoelectric ceramic under various cyclic loading conditions, Ceramics International (2015). https://doi.org/10.1016/j.ceramint.2015.08.076
Wang Y and Inman DJ. Simultaneous energy harvesting and gust alleviation for a multifunctional composite wing spar using reduced energy control Via piezoceramics. Journal of Composite Materials 2013; 47-1: 125-146.
Narita F and Shindo Y. Piezoelectric detection and response characteristics of barium titanate unimorph cantilevers under AC electric fields. International Journal of Metallurgical and Materials Engineering, in press. https://doi.org/10.15344/2455-2372/2015/103
Cohen RE. Origin of ferroelectricity in perovskite oxides. Nature 1992; 358: 136- 138. https://doi.org/10.1038/358136a0
Saito Y, Takao H, Tani T, Nonoyama T, Takatori K, et al. Lead free piezoceramics, Nature 2004; 432: 84-87. https://doi.org/10.1038/nature03028
Wakatsuki N, Yokoyama H and Kudo S. Piezoelectric actuator of LiNbO3 with an integrated displacement sensor Jpn. J Appl Phys 1998; 37: 2970-2973. https://doi.org/10.1143/JJAP.37.2970
Jaffe H and Berlin court DA. Piezoelectric transducer material, Proceedings IEEE 1965; 53: 1372. https://doi.org/10.1109/PROC.1965.4253